It is suitable for the production of various types electrical machine &Â electronic progressive dies and punches. And widely used in ceramics, printing machine, plastic, rubber, leather industry and cutting machines, CNC machine, CNC, PCB micro drill bits, etc.
Details of Tungsten Solid Carbide Rods
Product name
Solid carbide Rod /Â Bar /Â Stick
OD tolerance
0.5um
Surface fineness
Ra0.025a
Sizes
Diamter:Φ0.5-Φ0.35mm,Length:100-330mm(diameter is Φ1.0-Φ6.0mm,lenght can up 700mm)
Type
Round(solid,hollow)
Grade
YL10.2, K20,K30 ,YL50,YU06A,YU06R,YF06,YH6F,YG11 etc.
Material
100% Tungsten Raw Materials
Physical performance
High Precision , hardness,strength, wear resistance .
Application
For production various types electrical machine &Â electronic progressive dies and punches.And ceramics, printing machine, plastic, rubber, leather industry and cutting machines.
Non-standard or Tolerance
Can be customized
Â
1)Solid tungsten carbide rod/bar/stick
Diameter(D)
ToleranceÂ
Standard length
Φ0.5~5.5
+0.30~+0.45
330 (+5.0/0)
Φ6.0~40.0
+0.20~+0.60
330(+5.0/0)
Â
2)Hollow tungsten carbide rod/bar/stick
Outer Diameter
Tolerance of Outer Diameter
Diameter of Hole
Tolerance of Hole
Standard Length
Φ2.5~8.0
+0.2~+0.5
0.3~1.5
+/-0.15
330 (+5.0/0)
Φ10.0~30.0
+0.3~+0.8
2.0~5.0
+/-0.30
Â
330 (+5.0/0)
Â
Dimensions of Tungsten Carbide RodsÂ
Dimensions of Tungsten Carbide Rods
Dimensions
Dimensions
Type
Tolerance of diameter(mm)
Tolerance of length(mm)
Type
Tolerance of diameter(mm)
Tolerance of length(mm)
Φ3.0×320
±0.5/0.6
0/+5.0
φ8.0×45
±0.5/0.6
0/+5.00
Φ3.5×320
±0.5/0.6
0/+5.0
φ8.0×50
±0.5/0.6
0/+5.0
Φ4.0×320
±0.5/0.6
0/+5.0
Φ8.0×320
±0.5/0.6
0/+5.0
φ4.5×320
±0.5/0.6
0/+5.0
φ8.6×320
±0.5/0.6
0/+5.0
φ4.0×150
±0.5/0.6
0/+5.0
φ8.0×150
±0.5/0.6
0/+5.0
φ5.0×36
±0.5/0.6
0/+5.0
Φ9.0×320
±0.5/0.6
0/+5.0
φ5.0×80
±0.5/0.6
0/+5.0
φ10.6×320
±0.5/0.6
0/+5.0Â
φ5.0×40
±0.5/0.6
0/+5.0
φ10.0×65
±0.5/0.6Â
0/+5.0Â
φ5.0×100
±0.5/0.6Â
0/+5.0Â
φ10.0×60
±0.5/0.6Â
0/+5.0Â
Φ5.0×320
±0.5/0.6
0/+5.0Â
φ10.0×55
±0.5/0.6Â
0/+5.0Â
Φ5.5×320
±0.5/0.6Â
0/+5.0Â
φ12.0×78
±0.5/0.6Â
0/+5.0Â
Φ6.0×100
±0.5/0.6Â
0/+5.0Â
φ12.0×150
±0.5/0.6Â
0/+5.0Â
Φ6.0×320
±0.5/0.6Â
0/+5.0Â
φ12.0×130
±0.5/0.6Â
0/+5.0Â
Φ6.6×320
±0.5/0.6Â
0/+5.0Â
φ12.6×320
±0.5/0.6Â
0/+5.0Â
Φ7.0×320
±0.5/0.6Â
0/+5.0Â
φ15.6×320
±0.5/0.6Â
0/+5.0Â
φ7.0×60
±0.5/0.6Â
0/+5.0Â
φ16.0×100
±0.5/0.6Â
0/+5.0Â
φ7.6×320
±0.5/0.6Â
0/+5.0Â
φ16.6×320
±0.5/0.6Â
0/+5.0Â
φ8.0×80
±0.5/0.6Â
0/+5.0Â
φ18.6×320
±0.5/0.6Â
0/+5.0Â
φ8.0×40
±0.5/0.6
0/+5.0Â
φ25.0×320
±0.5/0.6
0/+5.0Â
Â
Tungsten Carbide Grade Information
Grade
Density g/cm3
Hardness HRA(hv)
T.R.S(M Pa)
Performances &applications recommended
YG6
14.9
89.5
2150
Good Wear resistance, used for hard wood,processing original wood,aluminum section bar,brass rod and cast iron.
YG8
14.6
89
2320
Suitable for the roughening of cast iron and light alloys and also for the milling of cast iron and low-alloy steel.
YG11
14.4
87.5
2260
Medium grain, for wear parts and mining tools
YG15
14.1
86.5
2400
Medium grain, for mining tools, cold heading and punching dies
YS2T
14.45
92.5
2800
Fine carbide,high wear resistance,high bending strength,high resistance to bonding, high thermal strength.Machining of refractory alloys, stainless steel and high manganese steel etc.Mainly used for disc cutter and other tools
YL10.2
14.5
92.5
3400
Wear resistance and strength comparatively higher,suitable for processing cast iron, non-ferrous metal and non-metalloid materials.
YNi8
14.6
88.5
1710
This grade with 8% nickel binder, it has good wear resistance& corrosion resistance performance ,especially used for high pressure environmental , also good for cutting the titanium alloy.
Â
Grade
ISO Grade
g/cm3
Density g/cm3
Hardness HRA>
T.R.S>N/mm²
TRS >
Performances or recommended applications.
Conventional grades
YG3
K05
15.20-15.40
91.5
1400
Medium grain, for finishing machining of cast iron and non-ferrous metals.
YG3X
K05
15.20-15.40
92.0
1300
Fine grain, for finishing machining of cast iron and non-ferrous metals.
YG4C
Â
15.05-15.25
90
1620
Coarse grain, for percussion drill bits and mining inserts.
YG6
K20
14.85-15.05
90.5
1860
Medium grain, for rough machining of non-ferrous metals.
YG6A
K10
14.85-15.05
92.0
1600
Fine grain, for drawing dies and woodworking tools.
YG6X
K10
14.85-15.0
91.7
1800
Fine grain, for cutting of non-ferrous metals.
YL10.1
K12-K25
M10-M30
14.9
91.5
1900
with good wear-resistance and good impact- resistance,Suitable for general drill tool wear parts.
YG8
K30
14.60-14.85
89.7
2060
Â
Medium grain, for drawing dies.
YG8A
K30
14.6-14.85Â
90.0Â
2000Â
Medium grain, for the drawing dies and wood-working.
YG8X
K30
14.60-14.85Â
90.5Â
2000Â
Fine grain, high hardness and oxidation resistance at high temperatures and good impact toughness.
YG8C
Â
14.55-14.75Â
88.0Â
2160Â
Coarse grain, for button drill bits and the mining inserts.
Â
YG10
 K40
14.25-14.55Â
88.0Â
2160Â
Medium grain, for machining gray cast iron with a low hardness.
YG11
K40Â
14.30-14.50Â
87.5Â
2260Â
Medium grain, for wear parts and mining tools.
YG11C
Â
14.20-14.40Â
87Â
2260Â
Coarse grain, for mining inserts.
Â
YGL10.2
M25-M40
K25-K35
 14.5
91.5Â
2200Â
It is suitable for machining common steel,cast iron,stainless steel,nickel based alloys and titanium alloys,etc.It is recommended for making conventional tools,such as twist drill,end mills,screw taps,gun drill,ect.
 YG15
Â
 13.95-14.15
86.5Â
2400Â
Medium grain, for mining tools, cold heading and punching dies.
Â
YG20
Â
 13.45-13.65
84.0Â
2480Â
Medium grain, for non-standard dies and moulds, cold heading and punching dies.
YG20C
Â
 13.40-13.60
82.5Â
2480Â
Coarse grain, for die and moulds making screws.
YG22
Â
13.15-13.55
83.0
2480
Medium grain, for non-standard dies and moulds, cold heading and punching dies.
Â
High-performance grade
YD40
Â
 13.10-13.55
82.5Â
2480Â
Â
High impact resistance, for cold heading and punching dies and hot heading and punching dies.
YD45
Â
 13.25-13.65
83.0Â
2480Â
High impact resistance, a special grade for hot heading dies.
YD05
Â
14.90-15.20
93Â
Â
Used for glass cutting
Â
YD15
Â
 14.80-15.10
91Â
1900Â
Used in the manufacture of heavy duty cutting tool for castings and forgings and all kinds of steel skin coarse car or get a good effect, is widely applied in cutting blade.
YD201
K05
14.65-14.95
93.0Â
1760Â
Ultra-fine grain, for finishing machining of non-ferrous metals and for wood-working tools.
YC45
P40,P45
12.60-12.90
90
2026Â
Used in the manufacture of heavy duty cutting tool for castings and forgings and all kinds of steel skin epidermislathe or have a good effect.
YS series grades
YS2T
 K30
14.40-14.60
 91.5
2200Â
It is belong with ultrafine grain alloy  , suitable for low-speed roughturning, milling, heat-resistant alloy and titanium alloy for the cutters and tap, saw blade milling cutter is best .
YS4
Â
13.40-14.40Â
91.5Â
2260Â
Suitable for iron-based, nickel-based high-temperature alloy, rough machining of high strength steel, is also suitable for cold hard cast iron, heat-resistant stainless steel, high manganese steel, rough machining of hardened steel.
YS8
M05,K10
13.9Â
92.5
1720Â
 Suitable for high, stainless steel, high manganese steel and high temperature alloy, silicon steel sheet, and cutting all kinds of coating materials, also suitable for high hardness cast iron and glass and so on work pieces of rough machining, finish machining.
YS10
M05,K10
14.30-14.50Â
91.5Â
2650Â
Suitable for high nickel iron, ball mill infinite chilled cast iron and white iron rough and finish machining, also used in rough machining and finish machining of cast iron.
Â
YS25
P20,P40
12.80-13.20Â
91.0Â
2000Â
Suitable for carbon steel, cast steel, high manganese steel, high strength steel and alloy steel rough turning, milling and planing.
YS30
P25,P30
12.45Â
91Â
1800Â
Alloy ultra fine particles, suitable for large feeding high efficiency milling all kinds of steel, especially the alloy steel milling.
Â
YS5
Â
Â
13.95-14.25Â
92Â
2000Â
Â
It is belong ultra fine grain alloy, suitable for high speed car, milling, heat-resistant alloy and titanium alloy for the cutters and tap, saw blade milling cutter is best
Cutting steel class grade
YT5
 P30
11.50-13.20
90.0Â
1750Â
Suitable for heavy duty cutting of steel and cast steel and for a low-speed and medium-speed and a big feed-rate roughing operation under unfavorable machining conditions.
YT14
P20
11.20-11.80
91.0Â
1550Â
Suitable for semi-finishing and finishing machining of steel and cast steel, using a medium feed-rate.
YT15
 P10
11.10-11.60Â
91.5Â
1500Â
Suitable for semi-finishing and finishing machining of steel and cast steel and a medium feed-rate and a rather high cutting speed is to be recommended.
YC40
P40
13.00-13.40Â
89.5Â
1860Â
Suitable for heavy duty cutting of steel and cast steel with a possible big feed-rate and for face milling as well.
YW1
M10
12.85-13.40Â
92.0Â
1380Â
Suitable for semi-finishing and finishing of stainless and ordinary alloyed steel.
YW2
 M20
12.65-13.35Â
91.0Â
1680
Suitable for semi-finishing and finishing of stainless and low alloyed steel, mainly used for machining of trains' wheel hubs.
YW3
M10
12.85-13.10Â
92.0Â
1420
It is suitable for semi-finishing and finishing of stainless and ordinary alloyed steel.
Â
Company Introduction Â
Â
About Lihua Cemented Carbide FactoryÂ
Â
Established in 1990, specialized in production carbide products more than 20 years and located in Zhuzhou city which is the hometown of tungsten carbide in China. Our products sold well to worldwide, has been build a long term relationship with our customers from Italy, Portugal, German, Turkey, USA, Mexico, India, Australia, South Africa etc.Â
Â
Main ProductsÂ
Our Main products include : Carbide Screwed Boring Bar, Plates, Rods, Sticks, Bushings, TP nozzles, 3D Printer Nozzles, Saw Blades, End Mills & Drill Bits, CNC inserts, Value Seats, Rotary Burrs, wheel cutters, Grits, Customized cutter woodworking tool, V-cutter, Shoes cutter ects.  Any kinds of customized carbide products can be made. Â
Â
Monthly Capacity of 15 Tons We have sophisticated equipments, such as Sintering Furnace, Automatic suppress Machine, Manual Hydraulic Suppress Machine, Ball Mill Machine, Drying Machine, Mixing Machine ect, Our production capacity has up to 15 Tons per month. Customized is welcome, customized sample can be ready in 3-5 days and 1Â day can deliver for stocks.
Â
Strictly QCÂ
We have a professional QC team follow to the System of ISO9001:2008, Covering the Raw Materials Incoming, Production Processes, Finished Products and Packaging to ensure high quality products output.
Shipping
We normally will dispatch your order within 2-10 working days depends on stock level, as soon as the order is shipped, we will list the tracking number on your order detail page, if there is any problem regarding to the shipping, please feel free to contact us.Â
Below shows the estimate delivery time for different courier: TNT: 10-14 working days DHL: 7-10 working days FedEx: 8 to 10 working days UPS: 7 to 10 working days EMS: 10-14 working day
Â
PaymentÂ
Â
Less than or equal to $1000:Â Â 100% advance via Paypal ,or Western UnionÂ
Over $1000 : 30% T/T advance , Balance before shipment .
Â
Contact:
Foreign Sales Manager: Coco Mobile:Â +86 13973352165Â (available 24 hours.) Website:Â http://en.lihuacarbide.com/ Factory Address:Â Tower A, 6th Building, Block C, Auto parts park, Tianyuan zone, Zhuzhou, Hunan, 412000, China
Tungsten Carbide Solid Carbide Rods
 Applications:
It is suitable for the production of various types electrical machine &Â electronic progressive dies and punches. And widely used in ceramics, printing machine, plastic, rubber, leather industry and cutting machines, CNC machine, CNC, PCB micro drill bits, etc.
Details of Tungsten Solid Carbide Rods
Product name
Solid carbide Rod /Â Bar /Â Stick
OD tolerance
0.5um
Surface fineness
Ra0.025a
Sizes
Diamter:Φ0.5-Φ0.35mm,Length:100-330mm(diameter is Φ1.0-Φ6.0mm,lenght can up 700mm)
Type
Round(solid,hollow)
Grade
YL10.2, K20,K30 ,YL50,YU06A,YU06R,YF06,YH6F,YG11 etc.
Material
100% Tungsten Raw Materials
Physical performance
High Precision , hardness,strength, wear resistance .
Application
For production various types electrical machine &Â electronic progressive dies and punches.And ceramics, printing machine, plastic, rubber, leather industry and cutting machines.
 Applications:
